Equipment Model SPP-V XL SP22P-M
General Length (inches) 71 55.1
Width (inches) 70 63
Height (inches) 59 63
Automation Fully automatic Fully automatic
Board Handling Maximum size (inches) 18x20 10x13
Minimum size (inches) 2x2 2x2
Maximum thickness (") 0.16 0.12
Minimum thickness (") 0.02 0.015
Maximum warpage (") 0.047 0.039
Underside component clearance (inches) 1.18 0.94
Board held by Edge clamp, vacuum, pin Edge clamp
Board support Tooling pins, vacuum plate Tooling pins, vacuum plate, other
Conveyor Standard Standard
Board Movement R to L, L to R L to R
Dual-lane board handling? No No
Print Head Print area (inches) 19x29 14.17x13.7
Maximum print stroke(") 29 13
Mdthod of registration Vision Vision
Optical alignment? Yes Yes
Alignment accuracy (microns) 25 N/A
Alignment repeatability (microns) 8 N/A
Print Modes Print/print, print/flood, Print/print, print/flood,
Print pressure (pounds) 0 to 43 0.011 to 0.055
Snap off (print gap) (inches) -0.04 to 0.4 N/A
Is snap-off programmable? Yes No
Cycle time (seconds) Single lane: 16 Single lane: 9
Stencil Frame size (inches) 39.4x33.5 21.65x25.6
PCB stencil seperation 0 to 0.39 0.024
Stencil cleaning Dry, wet, vacuum Dry, wet, vacuum
Programmable? Yes Yes
Stencil Wiper Standard Standard
Squeegee Squeegees Metal, polyurethane, other Metal, polyurethane
Squeegee pressure 0 to 43 0.011 to 0.055
Where measured? At squeegee head Air cylinder
Horizontal or central pivot? Both Horizontal
Vision system Type On the move , look down Fixed, on the move, look up, look down
Field of vision (inches) 0.120 0.2
SMEMA fiducial standard compatible? Yes Yes
Align calibration Full automatic Semi-automatic
Post-print inspection available? 2-D 2-D
Program Up and down line protocol SMEMA SMEMA
Number of programs stored 200 99
松下印刷机SP22P
1、二手SMT/AI设备买卖业务
2、销售自主研发和制造的AOI设备
3、SMT/AT设备零件买卖
4、SMT/AI设备服务销售
5、部分SMT新设备代理销售
